Why is your window foggy?
A foggy window is an extremely common problem in Quebec, especially during the winter months. But not all foggy windows are the same. To find the right solution, you first have to identify where the condensation is forming: on the interior surface, on the exterior surface, or between the two panes. Each case has different causes and different solutions.
Condensation on the interior surface of the glass
The causes
Condensation that forms on the interior surface of your window (house side) is usually caused by humidity levels that are too high inside your home. In winter, warm, humid indoor air comes into contact with the cold surface of the glass, which causes the water vapour to condense.
Common sources of excess humidity include:
- Cooking and showers without adequate ventilation
- Drying laundry indoors
- A humidifier set too high
- A damp basement or drainage problems
- Indoor plants in large numbers
- A new or recently renovated home: concrete, plaster and wood release moisture during the first few months.
The solutions
- Lower the humidity level: keep it between 30% and 40% in winter. A hygrometer (under $20) will let you measure it.
- Improve ventilation: use your range hood and bathroom fans systematically. Make sure your air exchanger is working properly.
- Encourage air circulation: avoid heavy curtains that prevent warm air from reaching the window. Open the blinds during the day.
- Use a dehumidifier: especially useful in the basement and in rooms without ventilation.
If interior condensation only appears on certain windows, it may mean those windows have a lower insulating value than the others. Single glazing or a thermos (sealed glass unit) nearing the end of its life is more likely to fog up than a high-performance Low-E double glazing.
Condensation between the two panes of the thermos
The cause
This is the most concerning problem. When fog appears between the two panes of glass in your sealed unit, it means the seal is broken. Humid air has made its way inside the unit, and the desiccant (the substance that absorbs moisture inside the spacer bar) is saturated. The insulating gas (usually argon) has escaped and been replaced by humid air.
At first, the fog may only show up in cold weather or during big temperature swings. Over time, it becomes permanent and can leave whitish mineral deposits that make the glass more and more opaque.
How to confirm the diagnosis
To check whether the fog really is between the panes:
- Run your finger over the fog: if it doesn't wipe away, it's inside the sealed unit.
- Check both sides: if the fog is neither on the interior surface nor on the exterior surface, it has to be between the panes.
- Look at the pattern: fog between the panes often forms characteristic patterns, appearing first at the bottom of the window or in the corners.
The solutions: defogging or thermos replacement
Two solutions exist, and Vosthermos offers both. Defogging removes the moisture trapped between the panes and restores clarity. It's suitable for recent fogging, on a thermos less than 15 years old whose glass is intact, and it costs less ($80 to $175 per window). On the other hand, it does not put the insulating gas back: it improves the view, not the original insulation.
To get the insulation back, the solution is replacing the sealed unit ($149 to $400 per installed unit, 10 years warranty). The good news is that it's generally not necessary to replace the entire window. Only the thermos (the glass) is changed, which represents considerable savings. Our Defogging or replacement page can help you choose.
Condensation on the exterior surface
Condensation on the exterior surface of the glass (street side) is a normal phenomenon and is actually a sign that your window is performing well. It happens mainly in spring and fall, early in the morning, when the outdoor temperature is cool and humidity is high. A highly insulating thermos keeps indoor heat from warming the outer surface of the glass, which allows condensation to form.
No action is needed. The fog disappears on its own once the sun warms the glass surface.
Preventing foggy window problems
- Choose quality thermos units with a dual seal and argon gas.
- Have your windows installed by qualified professionals to ensure an optimal seal.
- Maintain your home's ventilation: clean the air exchanger filters regularly.
- Act quickly at the first sign of fog between the panes: a prompt replacement prevents damage to the frame.
- Inspect your windows annually: check the condition of the seal, the weatherstripping and the frame.
Do you have a window that's fogged up between the panes? Vosthermos can help. Check out our pricing or visit our shop to discover our thermos replacement solutions for every type of window.

