GuidesJanuary 10, 20265 min read

Complete Guide to Weatherstripping Replacement in Quebec

Everything you need to know about window and door weatherstripping: types, identification, installation, and when to call in a professional.

Erik Deschênes, owner

Reviewed by Erik Deschênes, owner · Updated on

Complete Guide to Weatherstripping Replacement in Quebec

What is weatherstripping and why does it matter so much?

Weatherstripping, also called a weather seal, is that strip of flexible material that runs around your windows and doors to keep outside air from seeping in. It's a discreet component, but absolutely essential to your home's insulation. In Quebec, with our harsh winters where the mercury regularly drops below -20 degrees Celsius, worn-out weatherstripping can turn a perfectly functional window into an energy sieve.

According to Hydro-Québec, air leaks and ventilation can account for up to 25% of a home's heat loss. Replacing worn weatherstripping is one of the most cost-effective improvements you can make, with a minimal cost for a significant impact on your comfort and your electricity bill.

The different types of weatherstripping

Not all weatherstripping is equal. The type of seal varies depending on the window manufacturer, the model and the year it was made. Here are the main types you'll come across in Quebec homes:

Foam weatherstripping

This is the most basic and least durable type. You often find it in entry-level windows or as a temporary fix. Compressed or adhesive foam degrades quickly with Quebec's freeze-thaw cycles. Its lifespan is generally only 1 to 3 years. It's an acceptable stopgap, but not a permanent solution.

Tubular rubber or silicone weatherstripping

More durable than foam, tubular seals offer a better seal thanks to a shape that compresses against the frame. You'll find it on many entry doors and patio doors. EPDM rubber is the most common material and can last 5 to 10 years. Silicone is even more resistant to extreme temperatures.

Fin-type weatherstripping (thin blade style)

Very common in sliding windows and patio doors, this type takes the form of a thin, flexible fin. It allows the window to move while blocking air. It's often set into a groove (channel) in the window frame. Replacing it means pulling the old seal out of the groove and inserting the new one.

Pile weatherstrip (brush type)

Made up of thousands of tiny fibres attached to a backing, this type is used mainly for sliding windows and doors. It keeps air and insects out while allowing smooth sliding. You'll often find it along the sides and top of screen frames and sliding patio doors.

Profiled rubber compression seal

This is the high-end type found on quality windows and doors. It has a specific shape (often a D, P or E profile) and fits into a dedicated groove in the frame. These seals offer the best air tightness and the best durability, with a lifespan of 10 to 20 years depending on conditions.

How to identify the weatherstripping you need to replace

Before you can replace weatherstripping, you need to know exactly which type you need. Here's how to go about it:

  • Open the window or door and examine the seal all around the frame.
  • Note the shape: is it flat, tubular, fin-type, brush-type?
  • Measure the width and thickness of the seal, as well as the width of the groove if it fits into a channel.
  • Take a photo and, if possible, remove a small sample a few centimetres long.
  • Identify the window manufacturer: the brand is often printed on the metal spacer between the two panes or on the frame. Each manufacturer uses specific seals.

Installation: DIY or professional?

Some types of weatherstripping are easy to replace yourself, while others call for a professional.

What you can do yourself

Adhesive foam or rubber weatherstripping is the simplest to install. Just clean the surface, peel off the backing paper and stick the seal in place. Brush seals for screens are also easy to replace with a simple roller tool (available at any hardware store). For entry doors, the door bottom (threshold) with its built-in sweep can usually be replaced with a screwdriver and a few screws.

When to call a professional

If your window uses a profiled compression seal that fits into a specific groove, replacement can be more complex. You often have to remove the glazing or partially dismantle the window to reach the seal. On top of that, finding the right replacement seal can be a challenge: manufacturers each have their own proprietary profiles and some discontinued models are hard to track down. A professional like Vosthermos has full catalogues and specialized suppliers to find the right seal, even for older windows.

What it costs

Weatherstripping as a material is relatively inexpensive. Here's a sense of the prices:

  • Adhesive foam: $5 to $15 per roll (enough for 2-3 windows)
  • Tubular rubber seal: $10 to $25 per roll
  • Custom profiled seal: $3 to $8 per linear foot
  • Brush for screens: $8 to $20 per roll
  • Replacement by a professional: $30 to $80 per window at Vosthermos, parts and installation included (see our price list)

Since air leaks account for a big share of a home's heat loss, this is one of the cheapest repairs for the comfort it delivers.

The best time to act

The ideal time to replace your weatherstripping is at the end of summer or in early fall, before the first cold nights. Moderate temperatures allow for better adhesion of the seals and more comfortable work. That said, if you notice air infiltration in the middle of winter, don't wait until spring: even a temporary fix beats letting cold air seep in for months.

Go around all your windows and doors at the same time. If weatherstripping is worn in one spot, chances are good that others are worn too. Tackling everything at once is more efficient and often less costly than a window-by-window approach.

Not sure which type of weatherstripping you need? Contact Vosthermos at 514-825-8411. Our technicians can identify exactly the right seal for your windows and install it quickly, whatever the manufacturer or the age of your windows.

Share:

Need help with your doors or windows?

Our technicians can advise you and handle all your repairs. Free quote!