Why a spring inspection is essential
Quebec winters are brutal on your doors and windows. Repeated freeze-thaw cycles, snowstorms, ice, freezing rain and extreme temperature swings put every component to the test: the glass, the frames, the seals, the hardware and the caulking. Spring is the ideal time to assess the damage and plan the repairs you need before the next winter.
A methodical spring inspection lets you catch problems early, while they are still easy and inexpensive to fix. A small problem ignored in April can turn into a big, costly problem in November. On top of that, repair lead times are generally shorter in spring and summer than in the fall, when everyone remembers at the same time that their windows need attention.
The complete inspection checklist
Step 1: Exterior visual inspection
Start by walking around the outside of your house. For each window and door, check:
- The caulking: look for cracks, areas pulling away, missing sections. Pay special attention to the upper corners where water can collect and to the lower edges exposed to runoff.
- The exterior frame: look for signs of rot (on wood), discolouration or crazing (on PVC), corrosion (on aluminum). Press firmly with your thumb on the wood of the frames, especially at the bottom; if the wood gives way, that's rot.
- Trim and siding: make sure the trim around the window is properly fastened and that the siding or cladding isn't loose or damaged near the openings.
- Drainage: windows have a drainage system (weep holes at the bottom of the frame) to let out water that gets into the track. Make sure they aren't blocked by dirt or debris.
- Window sills: the sill at the bottom of the window should slope outward so water runs off. If water is pooling, check that the sill isn't damaged or that caulking isn't blocking the flow.
Step 2: Interior visual inspection
From inside, examine each window and door:
- The thermos (sealed glass unit): look carefully between the two panes. Is there fog, condensation, whitish deposits? Check at different times of day, since fogging can appear and disappear depending on the temperature. A window that gets morning sun may look clear in the morning but show fog in the afternoon when it's in the shade.
- Water marks: look for signs of water infiltration on the interior frame, the window ledge or the wall around it. Water rings, blistering paint or dark stains point to a sealing problem.
- Mould: inspect the frame corners, the joints and the interior ledge. Black or green mould is a sign of excess humidity, possibly linked to a window problem.
- Interior frames: make sure the interior trim is properly in place, with no gap between the trim and the wall or between the trim and the window frame.
Step 3: Operation test
Test each window and door mechanically:
- Opening and closing: every window should open and close easily, without forcing. If a window sticks, the mechanisms may be dirty, worn or out of alignment.
- Locking: locks and multi-point locks should engage fully. Partial locking means an alignment problem or a worn mechanism.
- Cranks: on casement windows, the crank should turn without excessive resistance. A seized mechanism can break if you force it.
- Sliding: on sliding windows and doors, the movement should be smooth and quiet. Hard sliding points to worn rollers or a dirty track.
- Air tightness: close the window and lock it. Run your hand slowly all around the seal. Do you feel air coming through? Even a slight draft indicates faulty weatherstripping or an adjustment problem.
Step 4: Screen inspection
Before insect season, check every screen:
- The mesh: look for holes, tears, sagging sections. Even a small hole lets mosquitoes through.
- The frame: make sure it isn't twisted or dented. A warped frame won't fit properly and leaves gaps.
- Clips and springs: make sure the retaining hardware holds the screen firmly in place.
- Sliding: on sliding screens, check that the rollers and tracks are in good shape.
Step 5: Inspection of entry doors and patio doors
Doors deserve special attention:
- The threshold: check the wear on the threshold and the door sweep. Visible daylight under a closed door is a major source of air infiltration and insects.
- The hinges: open and close the door slowly. Squeaking or resistance means hinges need lubricating or replacing. A door that won't stay in the open position has worn hinges.
- Perimeter weatherstripping: check all the way around the door. Close the door on a sheet of paper in several spots: if you can pull the sheet out without resistance, the weatherstripping is no longer doing its job.
- Patio door hardware: handle, lock, locking hook, child safety latch. Test each mechanism.
What to do with your inspection results
After your inspection, sort the problems you found into three categories:
- Urgent: active water infiltration, rotted frames, locks that don't work (security). Repair immediately.
- Important: fogged thermos, worn weatherstripping, cracked caulking. Schedule for summer or fall at the latest.
- Preventive maintenance: cleaning tracks, lubricating mechanisms, re-screening. Do it when you have time, but don't let it slide.
Basic preventive maintenance
Take advantage of your inspection to do the routine maintenance:
- Clean the tracks of all sliding windows and doors with a vacuum, then a damp cloth.
- Lubricate the mechanisms (cranks, multi-point locks, rollers) with a silicone-based lubricant.
- Clean the weep holes at the bottom of the frames with a pipe cleaner or a small wire.
- Wash the glass inside and out so you can better see the condition of the thermos.
- Clean the screens with soapy water and rinse well.
If your inspection turns up problems you can't solve yourself, Vosthermos can help. Our technicians carry out complete inspections and can fix most problems in a single visit: thermos, weatherstripping, hardware, screens and caulking.
Need help with your spring repairs? Call Vosthermos at 514-825-8411 for a free assessment. We respond quickly throughout the Montreal area, the South Shore, Longueuil, Brossard and Laval. Use the spring to get your windows back in perfect shape!

