Is your thermos foggy? Here's why
A foggy thermos (sealed glass unit) is never random. There is always a specific cause. Identifying the cause helps you choose the best solution and avoid the problem on your other windows. Here are the 5 main causes.
Cause #1: Aging seal (the most common)
A thermos is made of two panes separated by a metal spacer bonded with a polymer seal. This seal has an average lifespan of 15 to 25 years. Over time, it becomes brittle and loses its airtightness. Moisture from the air then gets in between the two panes.
Signs: window 20 years old or more, fogging that appears gradually.
Solution: thermos replacement ($149 to $400).
Cause #2: Repeated thermal shock
Extreme temperature swings (afternoon sun + cold at night) make the thermos expand and contract. Over time, these movements weaken the seal. Windows facing due south or west are more affected.
Signs: windows exposed to the sun, more pronounced fogging in winter.
Solution: replacement with Low-E glass, which reduces thermal shock.
Cause #3: Manufacturing defect
Sometimes a thermos leaves the factory with a manufacturing defect (poorly applied seal, cracked glass, misaligned spacer). These thermos units fog up within the first few years.
Signs: recent thermos (less than 10 years old) that fogs up.
Solution: check your warranty with the manufacturer. Otherwise, replacement.
Cause #4: Poor initial installation
If the thermos was poorly installed (frame not square, sloppy jointing, low-quality sealant), mechanical stress is placed on the seal and damages it prematurely.
Signs: several thermos units in the same house fogging up at the same time (same installer).
Solution: replacement by a certified professional installer.
Cause #5: Physical damage (stone, branch, ball)
An impact — even a small one — can create an invisible micro-crack in the glass or the seal. Moisture seeps in through that crack. This is often the cause for recent thermos units that suddenly fog up.
Signs: fogging that appeared after an event (storm, strong wind, ball).
Solution: replacement. Also check your home insurance — some policies cover this type of damage.
Summary table
| Cause | Clue | Solution |
|---|---|---|
| Aging seal | Window 20 years old or more | Thermos replacement ($149 to $400) |
| Thermal shock | Window in full sun | Replacement, with Low-E glass |
| Manufacturing defect | Recent thermos that fogs up | Manufacturer's warranty, otherwise replacement |
| Poor installation | Several thermos units fogging at the same time | Replacement by a professional |
| Physical damage | Fogging that appeared after an impact | Replacement (check your home insurance) |
How do you keep the problem from coming back?
Here are a few tips to extend the lifespan of your new thermos units:
- Ventilate your home properly: excess humidity speeds up aging
- Avoid curtains that stick to the glass: they trap heat and create thermal shock
- Maintain the caulking around the frame: every 5-7 years
- Inspect your windows regularly: catch the first signs early
Vosthermos: your expert since 2010
Whatever the cause of your foggy thermos units, Vosthermos has the solution. We replace your thermos units with modern units (Low-E + argon) and a 10 years warranty. If the fogging is recent and light, defogging may also be enough.
Call us at 514-825-8411 for a free at-home quote. Fast service in Montreal, the South Shore, the North Shore, Laval and Montérégie.

