A single-hung window that won't stay open: a common problem
Single-hung windows (also called vertical sliding windows) are among the most popular in Quebec homes, especially in houses built before 2000. Their counterbalance mechanism is designed to hold the moving sash in the open position. When that mechanism fails, the window drops as soon as you let go — a problem that's as annoying as it is dangerous, especially with children in the house.
How the counterbalance system works
Older cord-and-weight systems
Traditional single-hung windows (homes built before 1970) use cast iron weights hidden inside the frame jambs, connected to the moving sash by cords. When the cord breaks or the weight comes loose, the sash is no longer supported.
Modern balance systems
Newer windows use spring balances (also called block-and-tackle balances or spiral balances). These compact mechanisms replaced the old weights and work thanks to a coiled spring under tension. Over time, the spring loses strength and can no longer support the weight of the sash.
Diagnosis: identifying the cause
Step 1: Identify the type of mechanism
Open the window and look at the sides of the frame:
- Visible cords in side grooves → weight-and-cord system.
- Metal tube or plastic tube in a side track → spiral balance.
- Rectangular housing with a cord or tape → block-and-tackle balance.
- Friction tracks with no visible mechanism → friction system (entry-level windows).
Step 2: Test the mechanism
- Raise the sash halfway and release it. If it drops slowly, the balance is weak but still working — an adjustment may be enough.
- If the sash falls abruptly, the mechanism is broken or has lost all its tension.
- If the sash is hard to raise and then drops back down, the friction tracks may be dirty or bent.
Solutions by type of mechanism
Weight-and-cord system
If the cord is broken:
- Remove the side moulding (the jamb trim) to access the cavity where the weight sits.
- Retrieve the weight that fell to the bottom of the cavity.
- Replace the cord with braided nylon rope of a similar gauge. Avoid cotton, which rots.
- Reattach the weight and reinstall the moulding.
This type of repair is fairly simple but takes patience and access to the frame cavities.
Spiral balance
A spiral balance can often be readjusted:
- Locate the tension screw at the bottom of the balance tube.
- Turn that screw clockwise to increase the spring tension (3 to 5 turns should be enough).
- Test the window after each adjustment.
- If the spring is broken inside the tube, the entire balance has to be replaced.
Block-and-tackle balance
This type of balance is replaced as a complete unit:
- Remove the moving sash by tilting it inward (most modern windows have a tilt mechanism for cleaning).
- Unhook the old balance from the track and from the sash attachment.
- Install the new balance of the same length and same load capacity. The capacity must match the weight of the sash (generally between 4 and 15 kg).
Our online store carries balances compatible with the most common window brands in Quebec. If you're not sure which model you have, our hardware replacement service can identify and supply the exact part.
Temporary fix: a support rod
While you wait for the repair, you can hold your window open with:
- A wooden stick or rod cut to the right length and wedged between the moving sash and the bottom of the frame.
- A commercial window stop (available at hardware stores) that clamps onto the track.
Warning: these temporary fixes are no substitute for a real repair. An unsupported sash that drops can cause serious injury, especially to children.
When should you replace the whole window?
Replacing the entire window makes sense when:
- The frame is rotten or badly damaged.
- The thermos (sealed glass unit) shows signs of fog between the panes on top of the balance problem.
- Replacement parts are no longer available for your window model.
- The window is more than 25-30 years old and has several problems at once.
In every other case, repairing the balance mechanism is far more economical. At Vosthermos, we can replace the balances, the weatherstripping and the sealed units in your single-hung windows, adding several years to their service life. Check our pricing for an estimate.

